Multicolor imaging is a confocal scanning laser ophthalmoscopy technique that captures the fundus with three laser wavelengths at once.

The device then merges the three reflectance images into one composite picture. The result resembles a color photo, yet it is a pseudocolor image built from separate depth signals, so good reading starts with knowing what each channel contributes.


How Multicolor Imaging Works

The Spectralis platform scans the retina with blue (488 nm), green (515 nm) and infrared (820 nm) lasers simultaneously, while a confocal pinhole rejects light scattered from outside the focal plane. As a result, the image keeps high contrast and suffers less blur from media haze, and software then assigns each reflectance image to a color channel and combines them.

Why Wavelength Sets Depth

Light penetrates the fundus more deeply as wavelength increases, and blue light scatters in the inner retina, so it reports mostly superficial structure. Green light reaches slightly deeper, while infrared light reflects from the outer retina, RPE and choroid.

Test your knowledge 10 questions from this article
Choroida · Fundus imaging

Fundus Explorer Pro

Photograph the retinal findings described here with the phone already in your pocket — 22 D optics and built-in illumination in one handheld unit.

From Choroida — the team behind this site

The Blue Channel in Multicolor Imaging

Blue reflectance highlights the nerve fiber layer and the internal limiting membrane surface, while macular pigment absorbs blue light, so the fovea looks dark. Therefore, this channel suits epiretinal membranes, macular holes and nerve fiber layer defects.

The Green Channel

Hemoglobin absorbs green light strongly, so retinal vessels, hemorrhages and microaneurysms show sharp contrast, and hard exudates also stand out, which helps in diabetic retinopathy.

The Infrared Channel

Infrared reflectance reveals drusen, pigment changes and subretinal fluid, and it also tolerates cataract and small pupils better than visible light.

Reading the Composite Multicolor Image

The merged image usually shows a greenish tone over a reddish background, and superficial lesions tend to look green or cyan, while deeper lesions look orange or red. However, these colors differ from true fundus colors, so blood and pigment may look unfamiliar. Therefore, open the individual channels before you interpret any color change.

Epiretinal Membrane on Multicolor Imaging

An epiretinal membrane appears as a bright green sheen with radiating retinal folds, and the blue channel shows the membrane edge and striae clearly. Muftuoglu and colleagues reported better visualization of macular pucker with multicolor imaging than with color photography (see epiretinal membrane), although OCT still defines thickness and traction.

Reticular Pseudodrusen in Multicolor Imaging

Reticular pseudodrusen are often subtle on color photographs, whereas multicolor imaging can show a regular network of round lesions, often with a target aspect. Infrared reflectance supplies most of this contrast (see reticular pseudodrusen).

Multicolor Imaging (Color Fundus Scan): What It Shows

Subretinal Fluid and Central Serous Chorioretinopathy

In central serous chorioretinopathy, a serous detachment often appears as a well-demarcated area of altered color, so multicolor imaging can outline the extent of fluid and help track resolution. However, it cannot measure fluid height or show leakage, so OCT and angiography remain necessary (see subretinal fluid on OCT).

Geographic Atrophy and AMD

Atrophic areas show sharp borders on the composite image, and Ben Moussa and colleagues evaluated multicolor imaging for geographic atrophy and compared it with autofluorescence. In daily practice, autofluorescence remains the usual method for following atrophy growth (see fundus autofluorescence).

Multicolor Imaging Versus Color Fundus Photography

Color photography uses white flash light and records true color from all layers together, while multicolor imaging separates depth information and offers higher contrast for some lesions. However, grading scales such as diabetic retinopathy severity rely on true color photos, and clinicians also judge pigment, lipid and disc pallor more reliably on true color (see fundus photography).

Artifacts in Multicolor Imaging

  • Ghost maculopathy, a reflection artifact that can mimic a macular lesion
  • Color imbalance from poor focus on the plane of interest
  • Motion artifacts and line shifts during scanning
  • A strong green sheen from a normal young internal limiting membrane
  • Darkening toward the edges of the field

Practical Acquisition Tips

First, focus carefully on the layer you want to study, and next, average several frames to reduce noise. Also, keep the head straight, because tilt changes reflectance across the field.

Where Multicolor Imaging Fits

The same platform acquires OCT, so the composite image helps register scans to visible landmarks and also documents lesions well over time. However, it does not replace angiography, autofluorescence or true color photography.

Counseling the Patient

Explain that the scan uses low-power lasers and takes seconds, although patients may notice bright blue and green flashes. Then reassure them that the green tint is artificial and does not signal disease.

Pitfalls to Avoid

  • Do not diagnose disease from composite color alone
  • Do not apply photo-based grading scales to multicolor images
  • Check each channel before calling a lesion superficial or deep
  • Recognize ghost maculopathy before ordering further tests
  • Confirm fluid and membranes with OCT

All-fit smartphone adapter on a slit lampFundus Explorer Pro smartphone fundus camera
Choroida · Clinical imaging

Document what you see

Two smartphone imaging tools built for everyday clinic use — one for the slit lamp, one for the fundus.

From Choroida — the team behind this site

References

  1. Tan ACS, Fleckenstein M, Schmitz-Valckenberg S, Holz FG. Clinical application of multicolor imaging technology. Ophthalmologica. 2016;236:8-18.
  2. Kilic Muftuoglu I, Bartsch DU, Barteselli G, et al. Visualization of macular pucker by multicolor scanning laser imaging. Retina. 2018;38:352-358.
  3. Alten F, Clemens CR, Heiduschka P, Eter N. Characterisation of reticular pseudodrusen and their central target aspect in multi-spectral, confocal scanning laser ophthalmoscopy. Graefes Arch Clin Exp Ophthalmol. 2014;252:715-721.
  4. Ben Moussa N, Georges A, Capuano V, et al. MultiColor imaging in the evaluation of geographic atrophy due to age-related macular degeneration. Br J Ophthalmol. 2015;99:842-847.
  5. Pang CE, Freund KB. Ghost maculopathy: an artifact on near-infrared reflectance and multicolor imaging masquerading as chorioretinal pathology. Am J Ophthalmol. 2014;158:171-178.

Test yourself

A few questions straight from this article.

1 / 10 0 correct
  1. Which three laser wavelengths does multicolor imaging use to build its composite fundus image?

Ahmed Ophthalmologist

Writes and reviews the clinical articles on Educate. Every post is checked against peer-reviewed sources before it goes live.